| Anchor | ||||
|---|---|---|---|---|
|
| Table of Contents | ||||
|---|---|---|---|---|
|
...
December 2021
Spam Filter: Added a new feature for filtering/labelling spam traffic. The way it works is by dipping in industry specific spam databases and determining on the fly if the ANI is spam or not. Customers will have 2 options, block such calls from completing OR labelling the call as SPAM with CNAM.
...
Fixed p_charge_info use and strip jurisdiction calculations
Fixed calculation for NER% for level 5 on relationship performance report
Fixed effective date in emails going out for rate distribution functionality
Fixed timezone issue on LATA OCN report and deck uploader
Fixed Traffic History Report - Export Issue for Vendor
Refactored List Upload & Replace Blanking Logic causing Filtering Problems
Fixed layout for addresses on invoice generation
Refactored SIP Reason Report on Vendor level to use SIP Reason column
November 2021
Origination NRC/MRC: Added a new origination module to allow NRC (non-recurring charges) and MRCs (monthly recurring charges) to be configured for all assigned DIDs. The NRC/MRC configuration is also designed in a manner to allow them to be consumed for account-level (per relationship) NRC/MRC billing. Users can set up the NRC/MRC Profiles under the Tools -> Billing Profiles page and consume them under assigned DID's on the Origination Routeplan -> Numberings page. NRC/MRC is also available under the Balance/Payment tab on a per Relationship basis.
...
There will be an addition of 1 new field to the CDR in the November update.
p_charge_info
October 2021
General Improvements and Bug Fixes
New calculation engine for Destination SIP Reason Report
New simulation engine for HCv
Improved sync time for route plan rule loading
Fixed Stir/Shaken cannot sign response codes
Fixed rounding error on auto Invoice
Updated version of switch code for HCv
Fixed an issue on Hyperconnect Portal where Numbering Upload does not display tags
Fixed an issue in the distribute rate-sheet functionality where files were zipped twice in email attachment
Fixed an issue where a single vendor name repeats in the Duration Report on level 3
Optimized speed and accuracy of duration report for the count of completed calls
Added the option to search through tags on the Hyperconnect Portal Number listing page
September 2021
E911 Triggers: Added a new option in Routing called Trigger E911 for ANI List. If the Notification type is set to E911 along with ANI list it will trigger the E911 notification via email.
...
Applied full length sorting across all pages for Live Calls
Fixed relationship count for Portal Templates
Zip rate deck files on Rate Deck Distribution.
Fixed Stir/Shaken endpoint to use a port with IP for 302 redirect to any port.
August 2021
TFO Billing by LRN: Added a new option to the switch for rating of Origination TOLLFREE calls based on ANI or LRN of that ANI. The default behavior was rate based on ANI.
Note: We have added a new field in the CDR to represent LRN of the ANI which will be used for rating purposes: ani_lrn
...
There will be an addition of 1 new field to the CDR in the August update.
ani_lrn
July 2021
Deciphering STIR/SHAKEN Tokens: Added new columns to the CDR to assist with deciphering identity tokens. The new columns will provide information about the calling party, called party, attestation level, signing endpoint, etc. by simply parsing tokens.
Note #1: This is NOT the same as the Verification process, only additional information that is now stored on the CDR.
Note #2: The above CDR columns are only available for our HCv Environment at the moment, all customers can expect to be migrated to HCv soon automatically which has optimized networking/switch handling for large packets. We will notify customers prior to migration of the date on which CDRs will be changing.
STIR/SHAKEN Signing Endpoint: As of July 1st, 2021 all US Termination calls domestic or international must be signed by a STIR/SHAKEN token. The 46 Labs platform will not be signing attempts directly, instead it will permit the configuration of signing endpoints that use a 302 redirect interface.
Termination/Customer and Origination/Vendor trunk groups can select which signing endpoint it uses out of the globally configured Call Signing Endpoints.
Endpoints will be configured as a list wherein users can create an unlimited number of endpoints, each with its own IP or DNS value under Settings > STIR/SHAKEN Endpoints.
Note: 46 Labs has Tested/Certified following call signing vendors for now at scale using industry standard 302 redirect method.
TILTX (https://www.tiltx.com )
Note: This feature is only available on our HCv environment and should only be enabled on a Test Trunk Group for verification.
Note: Please reach out to support for additional information or in case you have your own endpoint integration.
...
There will be an addition of 6 new fields to the CDR in the July update.
stir_attest
stir_orig_id
stir_orig_tn
stir_dest_tn
stir_iat
stir_x5u
June 2021
Ports by Favorite Trunk Group Graph: Added a new port graphing capability on dashboard to allow users to compare favored trunk group utilization. This feature allows you to favorite a trunk group and then view it against other trunk groups in graphical format (max: 20 favorites). The drop down within the graph’s pane on the dashboard allows you to select/deselect the trunk groups.
...
There will be an addition of 4 new fields to the CDR in the June update.
orig_billed_prefix
term_billed_prefix
orig_tech_prefix
term_tech_prefix
May 2021
Traffic by Jurisdiction: Added a new report that will break down traffic by trunk group/state/country and jurisdiction. The primary implementation of this report is to facilitate retail taxation.
...
There will be an addition of a new field to the CDR in the May update.
oli_surcharge
April 2021
Hourly Destination Performance Report Multi-Level Export: Added functionality to export hourly destination report for all levels along with filters.
Number Translation: Added an overview page for all number translations. The Manipulation Overview will allow users to add/remove and upload translations in bulk.
Relationship -> Manipulation Overview
MCL Regions: Added a new feature called MCL Regions under Tools -> Master Code List. Users using this feature can assign and manage regions to default MCL Countries and use them as a filter on different reports.
Enable/Disable Trunks: Added the ability to enable/disable trunks from the trunk group section. When disabled trunks will no longer accept traffic or receive traffic based on what type they are.
AOR for Registrations: Added the Address of Record for registration based trunks under trunk status. If a registration is active and responding to OPTIONS the AOR will show the IP:Port being used for the registration.
...
Fixed ASR calculation formula on level 5 for hourly relationship performance.
Fixed search issue for trunk IP registrations.
Fixed top right search ip addresses.
Fixed High UDP port issue with Cisco devices on reINVITE.
March 2021
Ratedeck Effective Time: Added a new feature for the Rate Deck upload process where both the time and date can now be selected. This will allow the user to specify the time in GMT by which the deck can become effective. Previously all decks became effective at 00:00 GMT on the effective date.
...
Add timestamps on CDR export in relationship portal.
Add cost field on CDR export in relationship portal.
Improved List Uploader Job process to decrease processing time.
Added an export option within signaling manipulations inside trunk groups.
Add the ability to search signaling manipulations rules in the search box on the top bar.
Increased number of items that can be viewed in routing view.
Added profit protection value to terminating route plan view.
February 2021
New PDD/NER columns in Reporting: Added two new columns NER% and PDD to the Relationship and Hourly Performance Report and removed the PRV and PPM columns in favor of the new columns.
Filter by Agent in Reporting: Added the ability for users to select a specific Agent and have the Relationship and Hourly Reports filter to only show results where the selected Agent is listed on the Relationship.
Rate by Dialed Number: Added the new feature on Domestic Prefix Jurisdictional and LATA/OCN decks to choose a return rate for DNIS or LRN. The default value will be the LRN for new and existing decks.
Note: This will cause a change to API parameters; a new parameter is now available in the rate_decks API called rate_by which requires value 0 for LRN and 1 for DNIS.
Capacity Bursting Report: Added this new report to show 95th and 98th percentile usage for both Ports and CPS. This report can be used to review bursting data for all carriers or individual trunks groups.
NOTE: The Capacity Group and Trunk Group Bursting reports have been moved into this report.
ACD/ALOC/Duration Display Setting: Added new section to User Default Settings on General Settings page to select ACD/ALOC/DURATION Format for reports and the dashboard. The available display options will be Seconds (default), Minutes and HH:MM:SS
Seconds will display as an integer. Example: 90 seconds would display as 90.
Minutes will display with 2 decimals. Example: 90 seconds would display as 1.50.
HH:MM:SS will display in the form of Hours:Minutes:Seconds. Example: 90 seconds would display as 00:01:30.
...
Fixed CDR download and file name issue.
Default MCL now shows at the top of the list.
Fixed error in Reporting where a graph was not being generated.
Fixed issue on backend to not use filter media settings saved in DB if filter media is not checked.
January 2021
MCL Increments: Added a new feature to setup increments at the MCL level. These increments will be added against any MCL template for each country separately. These increments can also be used for Rate Deck Generators by selecting specific MCL templates. As templates are now also required on INTL deck uploads the default template will be pre-selected and users can change it to another template if required. The updated MCL that now contains the missing codes will now work with the selected template from a rate deck upload.
NOTE: This is a new column added to the deck upload API called “mcl_template_id”. Customers using APIs must update the API call to send that id as well. In order to not break the upload process for now, if the column is not found in API params, a default id of “1” will be used.
...