Trunk Type -
IP Address / FQDN -
Port - This represents the source port of the income SIP message. For UDP this is typically port 5060. Since TCP and TLS use random ephemeral ports as their source port, set this field to a 1 in this field when using the TCP and TLS protocol. The value of 1 represents all source ports.
Protocol -
Orchestrator Location -
Zones -
Orchestrator IP -
Failover -
Reset -
Add Trunk -
Added Trunks -
Trunk Status -
Search - Can be used to filter the list of Trunks in the Added Trunks table based on a simple ascii text pattern match.
Hunting - An Origination Customer Trunk Group support three different methods for selecting a Trunk.
Load Balance -
IP / FQDN OR USERNAME -
BOUND IP - This feature only applies to Termination Customer and Origination Vendor Trunk Groups.
PORT - Display the configured source port of the income SIP message.
PROTOCOL - Displays the configured protocol
FAILOVER - Displays the failover priority when the Hunting method is configured as Failover. The lower the priority the higher the preference for selections This column is only displayed when the Hunting method is configured as Failover.
ORCHESTRATOR IP -
LOCATION -
ZONES -
LAST MODIFIER -
STATUS -
Rows per page - By default the first 10 Trunks will be displayed in the Added Trunks table. Select the down arrow button to select 10, 20, 30, 40, or 50 Trunks to be displayed at one time. Use the left and right arrow buttons to navigate to other pages when there are more Trunks than what is displayed on a page.