RELATIONSHIP - Displays the name of the Relationship that the Trunk Group is configured in.
NAME (ID) - The Name of the Trunk Group followed by the Trunk Group ID in parathesis. Trunk Group IDs uniquely identify a trunk group and are automatically assigned when the Trunk Group is created. The first Trunk Group created will have an ID of 1. Each new Trunk Group will have an ID with a value of 1 higher than the previously created Trunk Group. Use meaningful names to help identify the purpose of the Trunk Group.
DIRECTION - Trunk Groups can have a direction of either Termination or Origination. A Termination Trunk Group is used to “terminate” traffic coming from a customer to the PSTN. An Origination Trunk Group is used to deliver PSTN traffic to a Customer.
RELATIONSHIP TYPE - Trunk Groups can have a relationship type of either Customer or Vendor. A Customer Trunk Group is used to communicate to customer SIP enable network devices. A Vendor Trunk Group is used to communicate to Vendor (PSTN Providers) SIP enable network devices.
RATE DECKS - Displays the number of rate decks associated to the Trunk Group. Hover over the rate deck number to display the rate deck names.
ROUTEPLANS - Displays the name of the routeplan associated to the Trunk Group.
TRUNKS - Displays the number of Trunks that are part of the Trunk Group. Hover over the Trunks number to display the name of the trunks.
MONITORING - Displays a Yes when Trunk Monitoring is enabled otherwise a -- is displayed. Note: Trunk Monitoring only applies to Origination Customer and Termination Vendor Trunk Groups.
MEDIA ANCHORED - Displays Enabled if Anchor Media is Enabled in the Media Handling page otherwise it Displayed Disabled.
PORTS - Displays the number of Ports configured in the Ports field in the General Section of the Trunk Groups Info page. If the Ports field is empty then -- will be displayed. For Origination Customer and Termination Vendor Trunk Groups, Ports defines the total number of simultaneous calls that can be forwarded across all Trunks configured in the Trunk Group. For Origination Vendor and Termination Customer Trunk Groups, Ports defines the total number of simultaneous calls that can be received by all of the Trunks configured in the Trunk Group. When the Ports field is empty and a Capacity Group is not associated with the Trunk Group, then the Port limit equal the system Port limit as displayed in the upper right of the portal.
CPS - Displays the number of calls per second configured in the CPS field in the General Section of the Trunk Groups Info page. If the CPS field is empty then -- will be displayed. CPS determines the number of call per second that can be processed by the Trunk Group. When the Ports field is empty and a Capacity Group is not associated with the Trunk Group, then the CPS limit equal the system CPS limit as displayed in the upper right of the portal.
STIR/SHAKEN - This needs fixed
STATUS - When checked the Trunk Group is available for use. When not checked the Trunk Group will not be used. The Status (use) of the Trunk Group is independent of the monitoring (e.g. sending and receiving of SIP Option messages).