ANI Predicted Routing Value (PRV)

Owned by Kelly Evans (Unlicensed)
Last updated: Jun 07, 2023
2 min read

The ANI Predicted Routing Value shows the performance of a specific ANI during the day. The ANI PRV is shown in the ANI Performance Report. The higher the ANI PRV the better the performance. The ANI PRV Intelligent Filter can be enabled on Termination Routeplans to block calls below user defined minimum performance value.

The ANI PRV value is calculated for each ANI that is in the ANI Performance Report.

Note:

  • ANI PRV = ( sum(revenue) - sum(cost) ) / 1000000 )

 

For an ANI to show up on the ANI Performance Report, there must have been at least five call attempts with that ANI within 60 seconds. Each time there are at least five call attempts with the same ANI within 60 seconds the number of Attempts and other related call metrics are updated for that ANI and are displayed in the ANI Performance Report.

The ANI Performance Report is reset each day at 0:00 GMT.

 

To enable ANI PRV Filtering on a Termination Route Plan, check the ANI PRV Filtering option on the Intelligent Filters tab of the Route Plan. Optionally you can also enable the Intelligent Optimization.

Â